![]() ![]() You probably want to do this first before calibrating the gimbals. If the sticks are too stiff or too loose, you can adjust the gimbal spring tension. This is usually set correctly out of the box, but just in case… Gimbal Calibration If you have the internal multiprotocol module, set this to Multi. If you have internal ELRS module, set this to CRSF. Why? I found higher contrast than this leaves “black ink” on the background when screen changesįinally, scroll to the Hardware page by pressing the PAGE>, scroll down to Int. When you are flying you are not really watching the screen so allowing only the keys (menu buttons) to trigger backlight is more sensible Why? By default both sticks and buttons will trigger the backlight and it wastes battery. But I set the voltage warning quite a bit higher than min voltage because the voltage drops quicker towards the end of the battery, this should minimize the chance of over-discharging the battery and results in unexpected radio shutdown Why? A li-ion cell working voltage range is between 3V to 4.2V, with two cells connected in series in the Zorro, that’s 6V to 8.4V. For now maybe just leave Date and Time unchanged. Press the PAGE> key twice to scroll to Radio Setup page, and update the following items:ĭate and time might randomly reset, it’s a bug in EdgeTX which will hopefully get fixed in the near future. Turn on the radio, hold down the SYS key will take you to the TOOLS page. If everything goes well, you should get to the default home page, which should look something like this. If you get this warning, follow this guide to fix it ![]() SD Card Warning – SD card content version does not match the firmware version.Alarms Warning – This warning will appear if Sound mode is set to mute.Failsafe Not Set – Go to “Model Setup” (press MDL button), scroll down and find “Failsafe”, set it to No Pulse.Simply put all the switches to their UP position (push away from you) to remove this warning Switch Warning (aka Control Warning) – some of the switches are not in their default positions.Simply move the throttle stick (left one) all the way down will get rid of this warning Throttle Warning – your throttle stick is not at the lowest position when the radio is turned on.18350 Li-ion batteries are not included and needs to be purchased separately, you need two of them:īrand new radios shouldn’t give you any warning when you first turn it on, but in case you do, here’s a list of possible warnings and how to fix them. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |